Design and Implementing the Asphalt Factory:
The hot asphalt plant is in both horizontal and vertical (asphalt tower) and cold asphalt. In general, the asphalt sand plant is guided to the asphalt tower in a cylindrical drill called Dyer, by elevator.
Vibration and vibrating gravity, which separates sand and gravel separating operations into a weighing or grading category, and in a special section, then according to the operator's need and definition, and to any extent from each of The warmed product is needed on the weighing floor and weighed into the mixer. At the same time and immediately after the hot sand fell to the bitumen mixer, the hot and cold process was added to the sand and the operation The mix starts. After the mixing and mixing of the asphalt made to the silo floor, the hot asphalt storage is poured out there for evacuation in the truck Comes up.
Asphalt is a mixture of sand and mortar (bitumen) and filler between sand (filler = smaller sand), which is produced by a variety of factories and with a certain amount and composition.
Types of asphalt are classified in two types of hot asphalt and cold asphalt, which are not heated to produce cold asphalt sand, but only heated bitumen and mixed with sand.